Rust Converter Results

Stop rust in its tracks. Sanco Industries’ Rust Kutter converts rust to a protective coating. Using a balanced formula, our rust converter chemically changes rust into a black or chalky-white finish. Here are three things to remember when using our rust converter on your rusty metal surfaces.

1.       Don’t remove all the rust. Large and loose patches of rust should be removed, but rust must be present for Rust Kutter to work properly.

2.       Clean the area to be treated. Remove dust, oil, grease, and loose paint; otherwise poor adhesion will occur.

3.       Allow 24 to 48 hours to dry. You’ll know when Rust Kutter is ready to paint when it loses its “tackiness”.

Get lasting results that most rust removers can’t match. Coat with paint and get a protective surface that resists the two agents of rust: moisture and oxygen. Don’t take chances with rust removal and a follow-up sealing treatment. Get all-in-one rust control with Rust Kutter.

Contact Sanco Industries for application questions or ordering options.